Jiffy j-1 用户指南

Esteam

Features and Directions

ESTEAM

Directions for Use

1. Make sure your Esteam

is unplugged before filling.

2. Check to make sure the factory-installed red o-ring is

secure inside the water tank before operating steamer
(figure #1).

3. Fill with tap or distilled water to the full mark on the outside of the steamer.

Never overfill. Never use water left overnight in steamer. Stale water causes
foaming action and can create water droplets.

4. After filling, place steam cap on steamer and twist firmly until cap

arrows align with arrows on the tank (figure #2). Make
sure it is secure before operating unit.

5. Plug your Esteam

into proper voltage outlet. Steamer

will start heating within 15 seconds, providing live
steam from cold water within 2 minutes.

6. Always steam with a vertical up and down motion (figure #3).

Do not tilt unit forward or backward.

7. Avoid allowing steamer to run dry of water.
8. Refer to page 8 for complete cleaning instructions.

WARNING: Never operate without water. Unplug after each use.

Figure 1

Figure 2

Features

• 3 times more powerful than any other

hand-held steamer on the market

• Largest water reservoir available
• Wide mouth, easy-to-fill water tank
• 600-watt heating element; automatic safety

shut-off temporarily cuts unit off when
it runs dry

• Uses plain tap or distilled water (no

additives required)

• Comfortable, easy-to-grip handle
• Special outer housing for cool-to-the-

touch operation

• No internal water lines or pumps to

become clogged by hard water

• 9-foot power cord for more manageable

handling

• Fits neatly inside attaché or suitcase
• Available with a multiple plug converter for world travel

Owner’s
Manual

Steam Cap

Figure 3

Includes:

ESTEAM

Main Body