Acer 1000 用户指南

58

English

Frequently asked questions

The following is a list of possible situations that may arise during the use of 
your computer. Easy solutions are provided for each one.

I turned on the power, but the computer does not start or 
boot up.

Look at the power indicator:

If it is not lit, no power is being supplied to the computer. Check the 
following:

If you are using on the battery, it may be low and unable to power 
the computer. Connect the AC adapter to recharge the battery pack.

Make sure that the AC adapter is properly plugged into the computer 
and to the power outlet.

If it is lit, check the following:

Is a non-bootable (non-system) disk in the external USB floppy drive? 
Remove or replace it with a system disk and press <Ctrl> + <Alt> + 
<Del> to restart the system.

Nothing appears on the screen.

The computer's power management system automatically blanks the screen to 
save power. Press any key to turn the display back on.

If pressing a key does not turn the display back on, three things might be 
the cause:

The brightness level might be too low. Press <Fn> + <→> (increase) to 
adjust the brightness level.

The display device might be set to an external monitor. Press the display 
toggle hotkey <Fn> + <F5> to toggle the display back to the computer.

If the Sleep indicator is lit, the computer is in Sleep mode. Press the power 
button to resume.

Image is not full-screen.

Each computer display has a different native resolution depending on the 
screen. If you set the resolution lower than this native resoution, the screen 
expands to fill the computer display. Right-click on your Windows desktop and 
select Properties to bring up the "Display Properties" dialog box. Then click on 
the Settings tab to make sure that the resolution is set to the appropriate 
resolution. Resolutions lower than the specified resolution are not full-screen 
on the computer or on an external monitor.