Acer 1000 用户指南

77

Eng

lis

h

7

After choosing the backup method, click Next.

Follow the instructions on screen to complete the process.

Restore from backup

You can restore backups previously created (as stated in the Create backup 
section) from hard disk, CD or DVD.
1

Boot to Windows XP.

2

Press <Alt> + <F10> to open the Acer eRecovery Management utility.

3

Enter the password to proceed. The default password is six zeros.

4

In the Acer eRecovery Management window, select Recovery actions and 
click Next.

5

Select the desired restore action and follow the onscreen instructions to 
complete the restore process.

Note: The "Restore C:" item is enabled only if there is a user 
backup stored on the hard disk (D:\). Please refer to the Create 
backup section.

Create factory default image CD

When the System CD and Recovery CD are not available, you can create them by 
using this feature.
1

Boot to Windows XP.

2

Press <Alt> + <F10> to open the Acer eRecovery Management utility.

3

Enter the password to proceed. The default password is six zeros.

4

In the Acer eRecovery Management window, select Recovery settings and 
click Next.

5

In the Recovery settings window, select Burn image to disk and click Next.

6

In the Burn image to disk window, select 1. Factory default image or 
2. Application CD and click Next.

7

Follow the instructions on screen to complete the process.

Note: Select 1. Factory default image when you want to burn a 
bootable disk that contains your computer's entire operating 
system as it was delivered to you from the factory. If you wish to 
have a disk that will allow you to browse the contents and install 
selected drivers and applications, select 2. Application CD — this 
disk will not be bootable.