Fedders a7d18e2b 用户指南

1

• Do not remove or modify this plug

• Do not use as an on/off switch

• Do not use outdoors

• Do not push furniture against or place

furniture on the electrical cord. This can trip
the test switch and/or damage the cord and
become a potential condition for arcing

• Do not attempt to repair the cord. If the cord

requires replacement, call an authorized
servicer.

• The Arc Detection Device is not a Ground

Fault Interrupter and should not be used as
such

• The Arc Detection Device contains an

electronic circuit board and should not be
submerged or exposed to water spray

If the Arc Detection Device has tripped, the
reset button will pop up. 

Follow these steps to reset the Arc Detection
Device:

1. Unplug unit from electrical outlet

2. Press the reset button

3. Plug the unit back into electrical outlet

4. Check to see if power has returned to the unit

You should test the Arc Detection Device
equipped power cord monthly, after every major
electrical storm, or if power to your Room Air
Conditioner has been interrupted. 

Follow these steps to test the Arc Detection
Device:

1. Unplug unit from electrical outlet

2. Press the reset button

3. Plug the unit back into electrical outlet

4. Press test button. Unit should trip and reset

button will pop up.

5. Press reset button again for use 

If above test fails, stop using the air
conditioner and contact customer service by
calling the following toll-free number: 
1-800-332-6658 or email:

The power cord supplied with this air
conditioner is equipped with an Arc Detection
Device designed to shut off power to the unit
when it senses an arc fault condition. An arc
fault is an unintentional electrical discharge
that occurs when electrical products or wires
are damaged, aged, or improperly used. An arc
fault can be potentially hazardous if left
undetected.

•

Plug unit only into a grounded
electrical outlet.

•

Do not use an extension cord or plug
adapter with this unit.

•

Do not operate unit with decorative front
or filter removed. 

•

•

•

We recommend that a qualified electrician
install unit in accordance with the National
Electrical Code and local codes and
ordinances.

•

Use copper conductors of correct wire
gauge and protector size only.

•

Do not alter cord or plug end. Do not
remove warning label on cord.

•

Air conditioner has a three-prong
grounding plug on the power supply cord,
which must be plugged into a properly
grounded three-prong wall receptacle for
your protection against possible shock
hazard. For models up to and including 7.5
amperes, use a grounding type wall
receptacle to match the cord plug.

•

For models above 7.5 amperes use a single
outlet grounding type wall receptacle to
match the cord plug.

•

Do not cut, alter or remove any of the
expanded polystyrene (styrofoam)
inside this air conditioner.

•

Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
The fumes can create a fire hazard or
explosion.

•

Do not introduce objects in the air
discharge area. This could cause
permanent damage.

•

pour liquids on the air

conditioner as this could cause a
malfunction. With the unit unplugged,
use a damp cloth for cleaning the unit.

•

Do not use strong solvents to clean the
air conditioner. 

•

Clean the air conditioner filter every
two weeks to avoid overheating caused
by air obstruction. Do not operate
without filter.

•

Do not obstruct the air intake area of
your air conditioner, as this could cause
overheating, thus activating the unit’s
security switch and shutting off the
unit.

•

Do not block air circulation to outside
louvers of cabinet.

•

Do not block air flow inside with blinds,
curtains, or furniture, or outside with
shrubs, enclosures, or other  buildings.

•

Do not run the air conditioner with an
outside protective cover in place. This
could result in fire or mechanical
damage within the air conditioner.

•

Depending on the model, your air
conditioner may weigh as much as 95
pounds. To insure safe handling, obtain
the necessary help to lift and position
the unit during installation and
removal.

•

Handle air conditioner with care. Wear
protective gloves whenever lifting or
carrying the unit.

•

Carefully inspect the location where
the air conditioner will be installed. Be
sure it will support the weight of the
unit over an extended period of time.

250V

30A

250V

15A

125V

15A  

250V  

20A

Do not operate this air conditioner without
proper time delay circuit protection (circuit
breaker or fuse). Refer to serial plate for
proper power supply requirements.

(As installed per building code) :

PROTECTOR SIZEWIRE GAUGE
15 AMP #14 MINIMUM
20 AMP #12 MINIMUM
30 AMP #10 MINIMUM