Epic wide 用户指南
www.epicstealthcam.com
2
Go to www.epicstealthcam.com to register your new camera. By doing this you will be kept up to date of all the
latest news as well as product updates. You will also be registered for monthly giveaways.
latest news as well as product updates. You will also be registered for monthly giveaways.
Another great feature of www.epicstealthcam.com is YouTube™ Action Upload. This super easy feature allows
you to upload directly to YouTube™ through your existing YouTube™ account.
you to upload directly to YouTube™ through your existing YouTube™ account.
This user manual covers the following:
1.
Set Up
2.
Operation
3.
Download
4.
Mounting
5.
Warranty
Any questions or need assistance setting up your EPIC. Call toll free: 877-269-8490.
1) Set up
Install batteries and memory card
Open the battery door located at the rear of the camera. Remove the security tag.
Insert two AAA batteries (proper polarity +/-). Batteries designed for digital
electronics are recommended. Close the battery door.
Open the battery door located at the rear of the camera. Remove the security tag.
Insert two AAA batteries (proper polarity +/-). Batteries designed for digital
electronics are recommended. Close the battery door.
EPIC recommends Energizer Ultimate Lithium batteries for optimum
performance.
performance.
Open rubber cover located at the rear of the camera. Install an SD memory card.
2GB or 4GB memory card size is recommended. Make sure memory card is
firmly seated in the camera. Press the rubber cover back into place.
2GB or 4GB memory card size is recommended. Make sure memory card is
firmly seated in the camera. Press the rubber cover back into place.
Make sure camera is in the OFF position whenever adding or removing memory.
If no SD card is inserted in the unit, the screen will show “NoSd” when you turn on the unit.
SD cards must be clean (no images from other sources). If you are using the SD card from other
cameras, please make sure to format the SD card in your computer using FAT formatting, not
FAT32, prior to use in the camera. New cards are good to use straight from the package.
cameras, please make sure to format the SD card in your computer using FAT formatting, not
FAT32, prior to use in the camera. New cards are good to use straight from the package.
Helpful tip on batteries: To extend your recording time we recommend using Lithium Batteries.
To save battery life, the camera will automatically shut down after 5 minutes of inactivity.