Lexmark W810 用户指南
147
Re
pl
pl
aci
n
n
g su
ppl
ies
Resetting the printer’s internal counter
After you replace the fuser, reset the printer’s internal counter to clear the
Replace Fuser
message from the operator panel display. Resetting the
counter helps prevent service calls by ensuring that the printer can alert
you when it is again time to replace the fuser. The reset process only
takes a few minutes.
you when it is again time to replace the fuser. The reset process only
takes a few minutes.
1
Plug in the printer power cord.
2
Press and hold the
Select
and
Return
buttons on the operator
panel while you turn the printer on.
When
CONFIG MENU
appears on the first line of the display,
release the buttons.
MAINT COUNTERS
appears on the second
line.
3
Press
Select
.
4
Press
Menu>
until you see
Reset Fuser
.
5
Press
Select
.
Resetting Fuser Count
appears briefly on the display, and then is
replaced by
CONFIG MENU
on the first line and
MAINT COUNTERS
on the second line.
6
Press
<Menu
to display
Exit Config Menu
.
7
Press
Select
to return to the
Ready
display.
The printer displays
Activating Menu Changes
and resets the
transfer counter. When
Ready
appears on the display, the printer
is ready to receive print jobs.