Lexmark W810 用户指南
163
Finishe
r
Emptying the hole punch box
The cardboard box in the finisher, shown in the following illustration, col-
lects the pieces of paper discarded by the finisher as it punches holes.
lects the pieces of paper discarded by the finisher as it punches holes.
The printer tracks the number of pages punched by the finisher. When the
counter determines that the hole punch box is nearly full (after approxi-
mately 50,000 punched pages),
counter determines that the hole punch box is nearly full (after approxi-
mately 50,000 punched pages),
Empty Box K
appears on the operator
panel display to alert you it’s time to empty the box. Each time you empty
the box, make sure you also reset the internal counter.
the box, make sure you also reset the internal counter.
W
ARNING
:
If you do not regularly empty the hole punch box, the
finisher may develop problems that require a service
call.
finisher may develop problems that require a service
call.
Complete the instructions in this section to empty the hole punch box.
1
Pull the finisher away from the printer.
Hole punch box