Continental dl1r-se 规格指南

• 17

3

/

4

" Width - 15 Cu. Ft. Capacity

• 36

1

/

4

" Width - 30 Cu. Ft. Capacity

• Modern, State-of-the-Art Styling

• Performance Rated Refrigeration System Utilizing

Environmentally Safe R-404A Refrigerant

• High Density Non-CFC Polyurethane Foamed-In-

Place Insulation

• Will Accommodate 12 x 20 Pans

• Chrome Plated Flow Line Handles

• Self-Closing Doors
• Automatic Interior Lighting

• Field Rehingeable Doors (model DL1RSE only)

• Automatic Hot Gas Condensate Evaporator

(model DL2RSE only)

• 6" Stainless Steel Legs

• External Digital Thermometer

•Remote 
•Pass-Thru 

(2 Sec. Model Only)

•Shallow Depth 

(2 Sec. Model Only)

•Half Door

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

(shown with optional 12 x 20 pans)

Refrigeration System

A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is
installed on the top of each refrigerator.
Plasticized fin coil and air circulation fans are con-
tained within a concealed “plug”-type insulated
housing, readily accessible on top of the cabinet
and separate from the food zone to increase food
storage capacity.  The entire “plug” system is fully
charged with environmentally safe R-134a refrig-
erant and mounted on a sturdy steel, rail-type
base which can be easily removed if freezer con-
version is desired.  Refrigerators are designed to
maintain 38-40 degrees Fahrenheit (3 to 5
degrees Centigrade) while operating with an unre-
stricted air supply in a  maximum ambient temper-
ature of 100 degrees Fahrenheit.  All condensate
water is evaporated by an automatic, non-electric,
corrosion-resistant condensate evaporator.  A
strict quality-assurance team inspects all materi-
als and components to certify that each model
conforms to the most exacting standards.  All
models are factory performance-tested for a  min-
imum of 16 hours prior to crating.

Cabinet Construction

All materials are of top quality, assembled to conform
with strict quality-assurance  requirements. The cabi-
net front is constructed of heavy-gauge polished
stainless steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all metal,
welded construction and internally supported and
braced for a rigid unit construction. Cabinet design
eliminates overlapping panels with raw edges.
Cabinet body is insulated with non-CFC, foamed-in-
place polyurethane foam with an average thickness of
3 inches to ensure increased energy efficiency. Full-
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive,
high impact thermal breaker strip eliminates conden-
sate build-up on the cabinet front. Fluorescent lighting
is activated by an easily accessible interior switch.
Cabinets are equipped with 6-inch adjustable stain-
less steel legs.

Shelving

Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diam-
eter fill wires spaced 

3

/

4

" apart. Shelves are welded

steel and epoxy-coated for a durable, long, rust-free
service life. Adjustments are in 1/2 inch increments
and a wide door opening allows the use of a variety of
optional pan and tray slide types.

Door Construction

Triple-pane tempered glass is encased by a heat

ed

heavy-duty aluminum extruded frame.
Replaceable snap-in door gaskets are self-adjust-
ing, heavy-duty, magnetic type. Door handles and
hinges are chrome-plated and non-corrosive.
Doors are provided with built-in cylinder locks
which are keyed alike. Hinges are cam-action, lift-
off type featuring positive safety stop at 120
degrees.