Continental dl1r-ss 规格指南

•Modern, State-of-the-Art Styling 
•Performance Rated “Plug” Refrigeration

System Utilizing Environmentally Safe R-134a
Refrigerant

•3" Non-CFC Polyurethane Foam Insulation
•Chrome-Plated Flow Line Handles
•Cam-Action Lift-Off Hinges
•Self-Closing Doors
•Magnetic Snap-In Door Gasket
•Cylinder Lock in Each Door
•Automatic Hot Gas Condensate Evaporator
•Adjustable 6" Stainless Steel Legs
•Heavy-Duty, Epoxy-Coated SteeL Shelves
•External Digital Thermometer

•   Half Door

•   Pass-Thru

•   Remote

•   Consult Factory

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

A “performance rated”, air-cooled, hermetically sealed,
capillary-type refrigeration system is installed on the top
of each refrigerator.  Plasticized fin coil and air circula-
tion fans are contained within a concealed “plug”-type
insulated housing, readily accessible on top of the cab-
inet and separate from the food zone to increase food
storage capacity.  The entire “plug” system is fully
charged with environmentally safe R-134a refrigerant
and mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38-40 degrees
Fahrenheit (3 to 5 degrees Centigrade) while operating
with an unrestricted air supply in a  maximum ambient
temperature of 100 degrees Fahrenheit.  All conden-
sate water is evaporated by an automatic, non-electric,
corrosion-resistant condensate evaporator.  A strict
quality-assurance team inspects all materials and com-
ponents to certify that each model conforms to the most
exacting standards.  All models are factory perform-
ance-tested for a  minimum of 16 hours prior to crating.

All materials are of top quality, assembled to con-
form with strict quality-assurance requirements.
The cabinet front and doors are constructed of
heavy-gauge polished stainless steel for durability.
All cabinet joints and seams are sealed vapor-tight.
Case is of all metal, welded construction and inter-
nally supported and braced for a rigid unit con-
struction.  Cabinet design eliminated overlapping
panels with raw edges.  Cabinet body and doors
are insulated with non-CFC, foamed-in-place
polyurethane foam with an average thickness of 3
inches to ensure increased energy efficiency.  Full-
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low-wattage, anti-sweat door
heaters concealed by a non-metallic, non-conduc-
tive, high-impact thermal breaker strip eliminate
condensate build-up on the cabinet front.
Automatic interior lighting is controlled by door
openings.  Cabinets are equipped with 6 inch
adjustable stainless steel legs.

Shelves are designed for heavy-duty use with
.306" diameter frame and brace members and
.140" diameter fill wires spaced 3/4" apart.
Shelves are welded steel and epoxy-coated
for a durable, long, rust-free service life.
Adjustments are in 1/2 inch increments and a
wide door opening allows the use of a a vari-
ety of optional pan and tray slide types.

Door shells are constructed of heavy-gauge
stainless steel and are internally braced and
urethane-foam-insulated for rigidity.  Door cor-
ners are of welded construction and polished.
Replaceable snap-in door gaskets are self-
adjusting, heavy-duty, magnetic type.  Door
handles and hinges are chrome-plated and
non-corrosive.  Doors are provided with built-
in cylinder locks which are keyed alike.
Hinges are cam-action, lift-off type featuring
positive safety stop at 120 degrees.