Blomberg mee 2020 用户指南

18

• Make sure that your oven has not suffered any damage during transport (defor-

• Check the power voltage. If there is a PERMANENT undervoltage (200-210 volts),

consult your electrical installer.

• The appliance should be installed at a distance of 85 cm above the floor.

• Place the oven on a flat and horizontal surface, away from any source of heat or steam.

•  Make sure that nothing obstructs the ventilation louvers at the back of the

• Make sure the electrical plug will be accessible after installation.

• Do not use your appliance immediately (wait approx. 1-2 hours) after transfer from a

cold place to a warm place as condensation may cause a malfunction.

• Your installation must be protected by a 10 Amp thermal fuse.

• It is mandatory to use a power point with a ground terminal, connected in accordan-

ce with current safety regulations.

• In your electrical installation, provide a device that is accessible to the installer, capable

of separating the appliance from the mains power and whose contact opening is at
least 3 mm at all of the poles.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.