Blomberg dv 16540 用户指南

18 - EN

1. Press the “Start/Pause/Cancel” button to 

start the program.

2. The ìStart/Pause/Cancelî button will light up 

to indicate that the program has started.

Progress of a running program is shown 

through the program follow-up indicator.

At the beginning of each program step, the 

related lamp will light up and the lamp of the 

completed step will turn off.

- Drying level will be illuminated during the 

whole drying process until the dryness 

reaches “Damp Dry / Ready to Iron”.

- Lamp lights when the dryer reaches the 

“Damp Dry / Ready to Iron” step and remains 

lit until the next step.

- Lamp lights when the dryer reaches the 

“Regular Dry / Ready to Wear” step and 

remains lit until the next step.

- The lamp lights when the program comes 

to an end and the anti-creasing function is 

activated.

C 

If more than one lamp lights or flashes 

constantly, it means that there is a 

malfunction or a failure (Please see 

ìTroubleshootingî).

Press and hold the ìStart/Pause/Cancelî 

button for around 3 seconds to ìCancelî the 

program  currently running.

Select another program by rotating the 

program knob.

Press the “Start/Pause/Cancel” button again 

to start the new program.

C 

The program which is selected first will go 

on even if the program selector knob is 

moved and another program is selected 

while the dryer is operating. You must 

cancel the current program to change the 

drying program.

A

  As the inside of the dryer will be 

excessively hot when you cancel the 

program when the dryer is running, 

activate the ventilation program to cool it 

down.

A 

If the dryer is stopped during any drying 

program, and if the position of the 

program selector knob is changed, a 

tone will be heard (if the ìCancel Audio 

Warningî function is not selected). The 

dryer will not start even if the ìStart/

Pause/Cancelî button is pressed, unless 

the program selector knob is returned to 

the initial program. The paused program 

must be cancelled in order to change the 

drying program.

In order to add or take out laundry after the 

start of the program;

1. Press the ìStart/Pause/Cancelî button to 

switch the dryer to ìPauseî mode. the drying 

process will stop.

2. Open the door at the Pause position and 

close it again after adding or taking out 

laundry.

3. Press the “Start/Pause/Cancel” button to 

restart the program.

C

  Laundry may be added or taken 

out during a drying process, but  

interrupting drying continuously will 

extend the program's time and increase 

energy consumption. Therefore, it is 

recommended to add all laundry before 

the drying program is started.

Your dryer will send out a tone when the 

program comes to an end. If you do not want 

to hear this, you need to press the ìCancel 

Signalî button.  The relevant lamp will light 

when this button is pressed and the tone will 

not activate when the program ends.

C 

You can select this function either before 

or after the program starts.