Blomberg waf 1300 操作指南

G

• Has a programme been set?

Has the >Start/Pause< button been pressed?

• Has the loading door been properly closed?

Open the loading door and push it with the palm
until you hear it lock into place.

• Is power cable plugged in?
• Is fuse for this socket intact?

• Combination of additional functions not possible.
• Is Child-proof lock activated? See "Child-proof lock".
• Has a time delay been set?See "Time delay".
• If the problem persists: Pull out the mains plug, wait

a few seconds, and insert plug back in.

• Is water tap all the way open?
• Is the inlet hose kinked?
• Is water inlet strainer clogged? See "Cleaning and

care".

• Is water pressure too low? Ask the responsible wa-

terworks.

• Has Aquasafe or Aquasafe+ (depending upon mod-

el) been activated due to leakages?

• Is the detergent dispensing drawer or siphon

soiled? See "Cleaning and care".

• Is softener too viscous? Add water.

• Is the siphon clogged? See "Cleaning and care".

• Is there too much detergent? Is load too small?
• Is water too soft? Ask your local waterworks.

• Are hoses properly attached?
• Is the foreign matter trap properly closed?
• Is foam coming out as a result of too much deter-

gent?

• Is Rinse hold set? See "Quick instructions for daily

use".

• Is the drain hose kinked?

• Is Rinse hold set? See "Quick instructions for daily

use".

• Is spin speed set too low or spin deselected?
• Is the distribution of load nonuniform? See "Quick

instructions for daily use".