Panasonic dmc-fs15 用户指南

下载
页码 120
81
VQT1W26
Advanced (Playback)
Note
• The protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in 
memory or the card is formatted.
• Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they 
cannot be deleted when the card’s Write-Protect switch is set to [LOCK].
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] mode menu. (P19)
Press 
3/4 to select the copy destination and then 
press [MENU/SET].
Press 
2/1 to select the picture and then press [MENU/SET].
Press 
3 to select [YES], and then press [MENU/
SET].
• If you press [MENU/SET] while copying pictures from the built-in 
memory to the card, the copying will stop halfway.
• Do not turn the camera off at any point during the copying 
process.
Press [] to return to the menu screen.
• Press [MENU/SET] to close the menu.
• If you copy from the built-in memory to a card, all the pictures are copied and then the 
screen automatically returns to the playback screen.
Note
• If you copy picture data from the built-in memory to a card which does not have sufficient free 
space, the picture data will only be copied halfway. We recommend using a card which has 
more free space than the built-in memory (about 50 MB). 
• If a picture exists with the same name (folder number/file number) as the picture to be copied in 
the copy destination when [
] is selected, a new folder is created and the picture is copied. 
If a picture exists with the same name (folder number/file number) as the picture to be copied in 
the copy destination when [
] is selected, that picture is not copied. (P94)
• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to 
copy them if they were edited with a PC.)
• Print settings on the original picture data will not be copied. Set the print settings again after 
copying is finished.
S [COPY]
:
All the picture data in the built-in memory are copied onto 
the card at one time. 
> step 
4
.
:
One picture at a time is copied from the card to the built-in 
memory. 
> step 
3
.
DMC-FS15PPC-VQT1W26_eng.book  81 ページ  2008年12月8日 月曜日 午後7時19分