Panasonic dmc-fz30 用户手册
Preparation
20
VQT0R81
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• When pressing the [MENU] button, the
screen shown in step 1 appears.
• The screen disappears after about
5 seconds. Turn the camera on again or
press the [MENU] button, select [CLOCK
SET] in page 2/4 of the [SETUP] menu
(P23) and set the clock in steps 1 and 2.
press the [MENU] button, select [CLOCK
SET] in page 2/4 of the [SETUP] menu
(P23) and set the clock in steps 1 and 2.
1 Set date and time.
•
2/1: Select the desired item.
•
3/4: Set date and time.
2 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
• When a fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing time may be
shorter if the battery is not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again.
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing time may be
shorter if the battery is not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• When you use a photo printing service, if
the date is not set in the camera, it will not
be printed, even if the store provides a
date printing option to your photo.
be printed, even if the store provides a
date printing option to your photo.
• For the date print setting, refer to P107.
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
1
1 2005
.
.
0
0 00
:
CLOCK SET
EXIT
MENU
SET
SELECT
EXIT
10:00
1
DEC.
1
1.2005
MENU
M/D/Y
CLOCK SET
SET
SELECT