Panasonic th-50vx100 用户指南
33.7 kHz
60.0 Hz
1125(1080)/60i
60.0 Hz
1125(1080)/60i
H-FREQ.
V-FREQ.
SIGNAL FORMAT
33.7 kHz
60.0 Hz
60.0 Hz
1125(1080)/60i
H-FREQ.
V-FREQ.
108.0 MHz
DOT CLOCK-FREQ.
SIGNAL FORMAT
41
SET UP for Input Signals
Select SIGNAL from the “SET UP” menu during RGB input signal.
SYNC
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal)
AUTO:
The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V
sync.
ON G:
Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS:
Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC and Digital input signal.
Display range:
Display range:
Horizontal 15 - 110 kHz
Vertical
Vertical
48 - 120 Hz
Input signal display
The dot clock frequency is displayed during digital signal input.
Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD)
is selected.
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD)
is selected.
SDI THROUGH
AUTO
SYNC
1024 ×768
XGA MODE
100 Hz
REFRESH RATE
SIGNAL
[ RGB ]
2
change
1
select
AUTO
VBS
ON G
SIGNAL
[ Digital ]
OFF
SDI THROUGH
100 Hz
REFRESH RATE
2
change
1
select
ON
OFF
ON: Enables active through.
OFF: Disables active through.
OFF: Disables active through.