Mobile Crossing map loader 用户手册
6
6.
The Map Loader main menu is shown in Figure 6. This is
where you will decide what you want to do.
where you will decide what you want to do.
Figure 6. Main Menu
2
1
3
4
If you thought you were on the Internet and do not see the
authentication screen of the previous step you should tap
EXIT and see "Problem Resolution" on page 24 before
restarting the Map Loader.
authentication screen of the previous step you should tap
EXIT and see "Problem Resolution" on page 24 before
restarting the Map Loader.
The program is fully functional without an Internet connection but
some tasks can be automated if you have a connection.
some tasks can be automated if you have a connection.
The Main Menu
The task available from the main menu include (refer to Figure 6):
The task available from the main menu include (refer to Figure 6):
•
(1) View/Build Base Map - This command loads maps
into the Flash Disk area on the WayPoint. It also shows
which region is currently loaded and manages the map
area permitting you to swap loaded regions.
into the Flash Disk area on the WayPoint. It also shows
which region is currently loaded and manages the map
area permitting you to swap loaded regions.
•
(2) View/Build Map Card - This command permits
loading maps into the card plugged in the SD slot on the
WayPoint. It also manages the maps that are loaded on
the SD.
loading maps into the card plugged in the SD slot on the
WayPoint. It also manages the maps that are loaded on
the SD.