WatchGuard x1000 参考指南

Policy Manager

Reference Guide

187

Enter a port number to restrict the policy to a single destination 
port. To enable communication to all ports, enter 0.

Select a protocol type to restrict the routing policy to a particular 
protocol. Options include TCP and UDP.

Enter a port number to restrict the policy to a single source port. 
To enable communication to all ports, enter 0.

Enter Firebox Access Passphrases dialog box

Enter the Status passphrase , which is used for establishing read-
only connections to your Firebox. Read-only access allows you to 
view logs and  status of the Firebox but not change configurations.

Re-enter the Status passphrase to verify.

Enter the Configuration passphrase, which is used for 
establishing read/write connections to your Firebox. Reat/Write 
access allows you full configuraiton access to the Firebox.

Re-enter the Configuration passphrase to verify.

Closes this dialog box and saves any changes.

Enter Tunnel Name dialog box 

Enter the tunnel name. The name is used as an identifier in Policy 
Manager.

Closes this dialog box and saves any changes.