WatchGuard x1000 参考指南

下载
页码 264
Packet Filter Services
Reference Guide
55
 - One UDP icon for port 138. Set client port to “port” to enable the 
NetBIOS datagram service to transfer information between 
hosts.
 - One TCP icon for port 139. Set client port to “client.” This sets up 
a NetBIOS TCP channel for passing information between hosts.
SNMP
Simple Network Management Protocol (SNMP) can be used to collect 
information about and configure remote computers. This has proven to be 
dangerous. A great many Internet attacks have used SNMP.
Characteristics
Protocols: UDP, TCP
Server Port(s): 161 (trap servers use 162)
Client Port(s): greater than 1023
Because SNMP could cause quite unpredictable changes in a network if 
enabled, carefully consider alternatives and log everything. 
SNMP-Trap
Simple Network Management Protocol (SNMP) traps are notification 
messages that an SNMP agent (for example, a router) sends to a network 
management station. These messages generally report an important event 
that should be logged or otherwise investigated.
Characteristics
Protocols:  UDP
Server Port(s): 162
Client Port(s): greater than 1023
SQL*Net
Oracle uses one port for its sql*net software. By default, this port is either 
1526/tcp or port 1521/tcp, but it is user-configurable by editing the 
tnsnames.ora file. To allow sql*net through the Firebox, set up a service 
icon for the port that your sql*net server is using, with a protocol of tcp,