WatchGuard x1000 参考指南
Reference Guide
87
CHAPTER 7
Out-of-Band Initialization
Strings
Strings
This chapter provides a reference list of PPP and modem initialization
strings used to configure out-of-band (OOB) management.
strings used to configure out-of-band (OOB) management.
The PPP client for Linux is called Pppd.
PPP Initialization Strings
These are the strings and syntaxes available for use when configuring a
Firebox for out-of-band management in Policy Manager:
Firebox for out-of-band management in Policy Manager:
asyncmap <map>
Set the async character map to <map>. This map describes which
control characters cannot be successfully received over the serial
line. Pppd will ask the peer to send these characters as a 2-byte
escape sequence. The argument is a 32-bit hex number with each
bit representing a character to escape. Bit 0 (00000001) represents
the character 0x00; bit 31 (80000000) represents the character 0x1f
or ^_. If multiple asyncmap options are given, the values are
ORed together. If no asyncmap option is given, no async character
map will be negotiated for the receive direction; the peer should
then escape all control characters. To escape transmitted
characters, use the escape option.
control characters cannot be successfully received over the serial
line. Pppd will ask the peer to send these characters as a 2-byte
escape sequence. The argument is a 32-bit hex number with each
bit representing a character to escape. Bit 0 (00000001) represents
the character 0x00; bit 31 (80000000) represents the character 0x1f
or ^_. If multiple asyncmap options are given, the values are
ORed together. If no asyncmap option is given, no async character
map will be negotiated for the receive direction; the peer should
then escape all control characters. To escape transmitted
characters, use the escape option.