WatchGuard x1000 用户指南
Opening a Configuration File
User Guide
49
Trusted network
The network behind the firewall that must be
protected from the security challenge.
protected from the security challenge.
External network
The network presenting the security challenge,
typically the Internet.
typically the Internet.
Optional network
A network protected by the firewall but still
accessible from the trusted and the external
networks. Typically, the optional network is used
for public servers such as an FTP or Web server.
accessible from the trusted and the external
networks. Typically, the optional network is used
for public servers such as an FTP or Web server.
Opening a Configuration File
Policy Manager is a comprehensive software tool for creat-
ing, modifying, and saving configuration files. A configu-
ration file, with the extension .cfg, contains all the settings,
options, addresses, and other information that constitute
your Firebox security policy. When you view the settings
in Policy Manager, you are seeing a “user friendly” version
of your configuration file.
ing, modifying, and saving configuration files. A configu-
ration file, with the extension .cfg, contains all the settings,
options, addresses, and other information that constitute
your Firebox security policy. When you view the settings
in Policy Manager, you are seeing a “user friendly” version
of your configuration file.
This section describes how to open a configuration file
after one has been created. This assumes you have already
run the QuickSetup Wizard and have a basic configuration
file saved either on the Firebox or on your local hard drive.
If you have not run the QuickSetup Wizard, see Chapter 5,
“Using Policy Manager to Configure Your Network” for
information on how to create a basic configuration from
scratch.
after one has been created. This assumes you have already
run the QuickSetup Wizard and have a basic configuration
file saved either on the Firebox or on your local hard drive.
If you have not run the QuickSetup Wizard, see Chapter 5,
“Using Policy Manager to Configure Your Network” for
information on how to create a basic configuration from
scratch.
1
Select Start => Programs => WatchGuard => Firebox
System Manager.
System Manager.
2
If you are prompted to run the QuickSetup Wizard,
click Continue.
click Continue.
3
If you are prompted to connect to the Firebox, click
Cancel.
Cancel.