WatchGuard x1000 用户指南
Chapter 5: Using Policy Manager to Configure Your Network
64
WatchGuard Firebox System
Adding Secondary Networks
Your configuration may require that you add secondary
networks to any of the Firebox interfaces. For more infor-
mation on secondary networks, see “Adding secondary
networks to your configuration” on page 33.
networks to any of the Firebox interfaces. For more infor-
mation on secondary networks, see “Adding secondary
networks to your configuration” on page 33.
1
Select Network => Configuration.
The Network Configuration dialog box appears.
2
Click the Secondary Networks tab.
The Secondary Networks tab appears, as shown in the following
figure.
3
Use the drop-down list in the lower-right portion of the
dialog box to select the interface to which you want to
add a secondary network.
dialog box to select the interface to which you want to
add a secondary network.
4
Use the field in the lower-left portion of the dialog box
to type an unused IP address from the secondary
network.
to type an unused IP address from the secondary
network.
When typing IP addresses, type the digits and periods in
sequence. Do not use the TAB or arrow key to jump past the
periods. For more information on entering IP addresses, see