WatchGuard x1000 用户指南
Configuring Routes
User Guide
71
3
Click the Net option.
4
Enter the network IP address.
5
In the Gateway text box, enter the IP address of the
router.
router.
Be sure to specify an IP address that is on one of the same
networks as the Firebox.
6
Click OK.
The Setup Routes dialog box lists the newly configured network
route.
7
Click OK.
The route data is written to the configuration file.
Defining a host route
Define a host route if there is only one host behind the
router. Enter the IP address of that single, specific host,
without slash notation. From Policy Manager:
router. Enter the IP address of that single, specific host,
without slash notation. From Policy Manager:
1
Select Network => Routes.
The Setup Routes dialog box appears.
2
Click Add.
The Add Route dialog box appears.
3
Click the Host option.
4
Enter the host IP address.
5
In the Gateway text box, enter the IP address of the
router.
router.
Be sure to specify an IP address that is on one of the same
networks as the Firebox.
6
Click OK.
The Setup Routes dialog box lists the newly configured host
route.