WatchGuard x1000 用户指南
Chapter 6: Managing and Monitoring the Firebox
74
WatchGuard Firebox System
explained in the QuickStart Guide included with your
Firebox. Otherwise, click Continue.
Firebox. Otherwise, click Continue.
The Connect to Firebox dialog box appears. You can connect to a
Firebox at this point, or you can cancel the Connect to Firebox
dialog box and connect to a Firebox later.
3
If you want to connect to a Firebox at this time, use the
Firebox drop-down list to select a Firebox.
Firebox drop-down list to select a Firebox.
You can also type the IP address or DNS name of the Firebox.
When typing IP addresses, type the digits and periods in
sequence. Do not use the TAB or arrow key to jump past the
periods. For more information on entering IP addresses, see
4
Enter the Firebox status (read-only) passphrase.
5
Click OK.
The Front Panel tab of the Firebox System Manager appears.
Viewing Basic Firebox Status
The System Manager initially displays the information
shown in the following figure.
shown in the following figure.