Wintal pd900 用户指南
20
TROUBLESHOOTING
Problem
Possible cause
Solution
DVB Mode
No signal found
Antenna is disconnected
Check antenna lead
Antenna is damaged
Check antenna
Antenna not aligned properly
Move the antenna around
Out of digital signal area
Make sure your location receives
digital signals
digital signals
No picture or sound
Accidentally entered Teletext
Exit out of teletext using the TTX key
on your remote
on your remote
Parental PIN
Channel is locked
Remove the parental lock via
the menu. See page 17 for more
information.
the menu. See page 17 for more
information.
USB/ Card Reader Mode
Will not read USB or memory cards
There is a DVD inserted in the tray
Remove the DVD from the unit.
a.
In DVD mode if you select SETUP,
b.
System Setup, Source. You can
change the source to USB or
Card without having to take out
the DVD.
change the source to USB or
Card without having to take out
the DVD.
Won’t playback a DivX fi le
Incompatible DivX version
Ensure that your DivX fi les are
compatible with the PD900. The
PD900 supports DivX 4.x and 5.x
versions encoded at 640x480 or less.
compatible with the PD900. The
PD900 supports DivX 4.x and 5.x
versions encoded at 640x480 or less.
DVD Mode
DVD playback prompts password
The DVD you wish to watch has a
disc rating higher than your current
Parental setting.
disc rating higher than your current
Parental setting.
Enter the DVD setup menu and change
the Parental lock to be higher than
your DVD’s rating.
the Parental lock to be higher than
your DVD’s rating.
Won’t read DVDs
Disc is scratched or dirty
Make sure you clean your DVDs and
that they are free from scratches of
marks.
that they are free from scratches of
marks.
Subtitle/ Audio key does not work
Your DVD does not have any subtitles
or alternative audio tracks
or alternative audio tracks
Ensure the DVD you wish to watch
has subtitles and other audio tracks
(languages, DTS, AC-3 etc.)
has subtitles and other audio tracks
(languages, DTS, AC-3 etc.)
Misc.
Remote control is not working
Battery is fl at
Replace the batteries with new ones
(2x “AAA”)
(2x “AAA”)
Not seeing the IR sensor
Make sure you are pointing the remote
to the IR sensor located on the front
of the unit and that there are no
obstacles in between.
to the IR sensor located on the front
of the unit and that there are no
obstacles in between.