Wren Associates eg8-hb 安装指导

 

 
 
 

PROPERTY OF WREN 

Page 1 of 3 

7L240rev-C 12/19/2006 

 
 

124 WREN PARKWAY • JEFFERSON CITY, MO 65109 • TOLL FREE (800) 881-2249 • FAX (877) 893-2317 

 

 

The IP-Enabled Environmental Globe (EG8) is an attractive, durable 

solution for outdoor applications accommodating a single fixed camera. It 
is an ideal solution for situations where reliability and aesthetics are 

important such as retail, property management, commercial and industrial 

facilities 
 

a.  #2 Phillips-head screwdriver 

b.  7/16” Wrench or socket 

c.  Outdoor-approved pipe thread sealant (included) 

 

A.  Foam Dust Plug 

B.  Housing (double wall) 

C.  Mounting Plate safety Tether 
D.  Dome Safety Tether 

E.  Camera Mounting Plate Assembly (with optional 

heater/blower and circuit board) 

F.  Flat Washer  
G.  Wing Nut 

H.  Multi-position Camera Bracket 

I.  Camera Bolt 
J.  8” Dome Assembly 

 

1.  Installation and servicing should be performed by qualified personnel 

only. 

2.  All work should conform to local building codes. 

3.  Use only Wren-approved replacement parts or supplied accessories. 

Failure to comply may invalidate remaining warranty period. 

4.  Verify proper location and installation of the housing mount (1½” NPT 

pipe or approved mount). The pipe or mount shall be capable of 
supporting three (3) times the weight of the housing and its contents. 

5.  Verify proper installation of cabling to support camera power and 

communication requirements for fixed camera applications. 

6.  The EG8 is designed to be operated by a 24VAC power source 

capable of supplying 2 amps continuously, plus required amperage for 

the selected camera(s). (See Master Power Supply instructions for 

wiring/installation instructions of Master Power Supply.) 

EG8-IP