Fusion FM-402 产品宣传册
TECHNICAL SPECIFICATIONS
AMPLIFIERS
FM-504, FM-402, MS-AM702
FM-504
57.5 (D) x 330 (L) x 220(W)
12.6 Volt power output specification
50 WRMS per channel @ 4 ohms and ≤1%THD+N
75 WRMS per channel @ 2 ohms and ≤1%THD+N
150 WRMS bridged channels @
4 ohms and ≤1%THD+N
14.4 Volt power output specification
14.4 Volt power output specification
65 WRMS per channel @ 4 ohms and ≤1%THD+N
95 WRMS per channel @ 2 ohms and ≤1%THD+N
200 WRMS bridged channels @
4 ohms and ≤1%THD+N
FM-402
FM-402
57.5 (D) x 260 (L) x 220(W)
12.6 Volt power output specification
50 WRMS per channel @ 4 ohms and ≤1%THD+N
96 WRMS per channel @ 2 ohms and ≤1%THD+N
160 WRMS bridged channels @
4 ohms and ≤1%THD+N
14.4 Volt power output specification
14.4 Volt power output specification
65 WRMS per channel @ 4 ohms and ≤1%THD+N
100 WRMS per channel @ 2 ohms and
≤1%THD+N
≤1%THD+N
200 WRMS bridged channels @
4 ohms and ≤1%THD+N
MS-AM702
MS-AM702
Operating Range +10-16Volts DC / Negative Ground
S/N Ratio @ 1kHz / 1W Reference -- 84dB
High Pass x-over - 60Hz – 600Hz
Maximum Operating Current - 8 AMPS
D-Class Technology
2 ohm stable stereo
Water resistant chassis
Conformal coated PCB
70 Watts x 2 (max)
20 Watts RMS at 4 Ohms per channel @1%THD+N
33 Watts RMS at 2 Ohms per channel @1%THD+N
FULL RANGE SPEAKERS
MS-FR602, MS-FR702
MS-FR402
Tweeter type
Titanium Dome
Max power (watts)
120
Efficiency (1W/1M)
87db
Frequency response
90 – 22kHz
Impedance
4 ohms
Min. mounting depth -
allowing clearance (mm/in) 60mm (2 3/8")
MS-FR602
Tweeter type
Titanium Dome
Max power (watts)
200
Efficiency (1W/1M)
90db
Frequency response
70 – 22kHz
Impedance
4 ohms
Min. mounting depth -
allowing clearance (mm/in) 75mm (3")
MS-FR702
Tweeter type
Titanium Dome
Max power (watts)
260
Efficiency (1W/1M)
91db
Frequency response
60 – 22kHz
Impedance
4 ohms
Min. mounting depth -
allowing clearance (mm/in) 80mm (3 3/16")
BOX SPEAKERS
MS-BX402
Tweeter type
Titanium Dome
Max power (watts)
120
Efficiency (1W/1M)
87db
Frequency response
90 – 22kHz
Impedance
4 ohms
CUBE SPEAKERS
MS-BX225
Max power (watts)
100
Efficiency (1W/1M)
86db
Frequency response
120 – 22kHz
Impedance
4 ohms
10” SUBWOOFER
MS-SW10
Magnet Structure
60 Oz
Power Handling
400 Watts MAX
Voice Coil
2” Til
Impedance
4 Ohms
Free Space Resonance(Fs) 28Hz
Efficiency (1W/1M)
88dB
Frequency Response
30Hz - 2.0kHz
Mounting Depth
115mm
ACTIVE SUBWOOFER
MS-AB108
Woofer Size
200mm (8”)
Power Output
210 Watts MAX
Frequency Response 30Hz - 300Hz
Enclosure
515 x 233 x 190mm
(20 1/4 x 9 3/16 x 7 1/2)
WIRED REMOTE
MS-WR100, MS-WR600C
REMOTE CONTROL
Mounting diameter
3”
Screen
Alphanumeric LCD
Connection
Mini DIN
MS-WR100 compatible with MS-IP500 and
MS-CD500
MS-WR600C compatible with MS-IP600,
MS-CD600 and
MS-AV600
EXTERNAL DOCK FOR iPod
MS-IPDOCK
EXTERNAL DOCK
Cut-out hole
126mm x 39mm
Compatible with
MS-CD500, MS-CD600
and MS-AV600
iPod COMPATIBILITY
MS-IP500, MS-IP600, AND MS-IPDOCK
Compatible with the follow iPod models:
classic - Gen5 (30GB, 60GB, 80GB),
Gen6 (80GB, 160GB) and Gen7
nano - Gen2, Gen3 and Gen4
touch - Gen1 and Gen2
For the latest news on supported iPod models visit
www.fusionelectronics.com
STEREO’S
MS-CD600, MS-AV600, MS-IP600
FM TUNER
Frequency range (MHz)
87.5 – 107.9
AM TUNER
Frequency range (kHz)
530 – 1710
GENERAL
Operating voltage
+10.2 - 16 VDC
Fuse rating:
15 Amp
CD PLAYER
Laser power
Class I
POWER OUTPUT
Maximum
70W x 4
26 WRMS per channel @ 4 ohms
45 WRMS per channel @ 2 ohms
Pre – Output Voltage
3 V/10 k ohms
MS-CD500, MS-IP500,
FM TUNER
Frequency range (MHz)
87.5 – 107.9
AM TUNER
Frequency range (kHz)
530 – 1710
GENERAL
Operating voltage
+10.2 - 16 VDC
Fuse rating:
15 Amp
CD PLAYER
Laser power
Class I
POWER OUTPUT
Maximum
70W x 4
26 WRMS per channel @ 4 ohms
45 WRMS per channel @ 2 ohms
Pre – Output Voltage
2 V/10 k ohms
© Copyright 2009 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. “Made for iPod” means that an electronic
accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
www.fusionelectronics.com
FUSION Electronics New Zealand Ph: +64 9 369 2997
FUSION Electronics Australia
FUSION Electronics Australia
Ph: +61 1300 736 012
FUSION Electronics Europe
Ph: +44 1268 889580
FUSION Electronics USA
Ph: +1 623 580 9000