3com 4500G 快速安装指南
38
C
HAPTER
3: S
ETTING
U
P
FOR
M
ANAGEMENT
SNMP Management
You can manage a switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 23. For example, you can use the 3Com Network Director software,
available from the 3Com website.
running the Simple Network Management Protocol (SNMP) as shown in
Figure 23. For example, you can use the 3Com Network Director software,
available from the 3Com website.
Figure 23 SNMP Management over the Network
Setting Up
Overview
Overview
This section gives an overview of what you need to do to get your switch
set up and ready for management when it is in its default state. The whole
setup process is summarized in Figure 24. Detailed procedural steps are
contained in the sections that follow. In brief, you need to:
set up and ready for management when it is in its default state. The whole
setup process is summarized in Figure 24. Detailed procedural steps are
contained in the sections that follow. In brief, you need to:
■
Configure IP information manually for your switch or view the
automatically configured IP information
automatically configured IP information
■
Prepare for your chosen method of management
SNMP Network Management
Workstation
Switch
Connect over Network
using SNMP