3com 8807 参考指南
Information Center Configuration Commands
1011
Parameter
channel: Configures the channel to output information to buffer.
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channels.
channel-name: Specifies the channel name. The name can be channel7,
channel8, channel9, console, logbuffer, loghost, monitor, snmpagent,
trapbuffer, logfile.
channel8, channel9, console, logbuffer, loghost, monitor, snmpagent,
trapbuffer, logfile.
size: Configures the size of buffer.
buffersize: Size of buffer (number of messages which can be kept).
Description
Use the info-center logbuffer command to configure to output information to
the memory buffer.
the memory buffer.
Use the undo info-center logbuffer command to cancel the information output
to buffer.
to buffer.
By default, the switch outputs information to the memory buffer whose size is
512, that is, the memory buffer can hold 512 messages.
512, that is, the memory buffer can hold 512 messages.
This command takes effect only after the system logging is enabled.
Related command: info-center enable, display info-center.
Example
# Send log information to buffer and sets the size of buffer to 50.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] info-center logbuffer size 50
info-center logfile
Syntax
info-center logfile
undo info-center logfile
View
System view
Parameter
None
Description
Use the info-center logfile command to configure to output information to the
logfile.
logfile.
Use the undo info-center logfile command to cancel the information output to
logfile.
logfile.