3com 8807 参考指南

C

HAPTER

 42: VPLS C

ONFIGURATION

 C

OMMANDS

event: Enables debugging for event notification among modules.

Loadshare: Enables debugging for load sharing.

Use the debugging mpls l2vpn command to enable individual kinds of L2VPN 
debugging.

Use the undo debugging mpls l2vpn command to disable the corresponding 
debugging.

By default, all L2VPN debugging is disabled.

# Enable debugging for L2VPN errors.

<SW8800> debugging mpls l2vpn error 

display mac-address vsi [ vsi-name ] [ peer peer-address | local | vlan-interface 
vlan-interface-number ] ] [ dynamic | static ] [ count ]

Any view

peer: Specifies the peer IP address.

peer-address: Peer IP address.

local: All local MAC addresses.

vlan-interface: Specifies the VLAN interface whose MAC address corresponds 
with the locally bound VSI.

vlan-interface-number: VLAN interface number.

vsi: Specifies the VSI to be displayed.

vsi-name: VSI Name.

dynamic: Displays only dynamic VSI MAC forwarding entries.

static: Displays only static VSI MAC forwarding entries.

count: Displays only the number of VSI MAC forwarding entries.

Use the display mac-address vsi command to display VSI MAC forwarding 
information.. You can display the MAC forwarding entries of either all VSIs or a 
specific VSI.

Related command: vsi, mac-address static.