3com 8807 用户指南
638
C
HAPTER
52: VPLS C
ONFIGURATION
NPE
It is a core PE device, located at the edge of the VPLS core network. It provides
VPLS transparent transmission service in the core network.
VPLS transparent transmission service in the core network.
VSI
Through virtual switching instance (VSI) you can map the actually connected links
to each virtual links.
to each virtual links.
VPLS Basic
Configuration
Configuration
VPLS Configuration
Tasks
Table 569 VPLS configuration tasks
Operation
Command
Description
Configure routing protocol
for public network
for public network
Refer to the related sections in
Operation Manual - Routing
Protocol
Operation Manual - Routing
Protocol
Required
Configure basic MPLS
functions
functions
Refer to chapter 2
Configuring MPLS Basic
Functions in Operation
Manual - MPLS
Configuring MPLS Basic
Functions in Operation
Manual - MPLS
Required
Configure LDP expansion
session peer
session peer
mpls ldp remoter-peer
index
index
Required
Enabling L2VPN
mpls l2vpn
Required
Configure a VPLS instance
vsi vsi-name [ static ]
Required. static is required
for configuring a VSI.
for configuring a VSI.
Configure an IP address of a
peer PE
peer PE
peer peer-ip [ vc-id vc-id ] [
upe | dual-npe ] [
encapsulation { ethernet |
vlan } ]
upe | dual-npe ] [
encapsulation { ethernet |
vlan } ]
Required
Configure static MAC
addresses
addresses
mac-address { static H-H-H }
vsi vsi-name { peer peer-ip |
vlan-interface
vlan-interface-number }
vsi vsi-name { peer peer-ip |
vlan-interface
vlan-interface-number }
Optional
Configure VLAN for user
access and binding VSI
access and binding VSI
l2 binding vsi vsi-name [
access-mode { vlan |
ethernet } ]
access-mode { vlan |
ethernet } ]
Required
Configure VPLS characteristics bandwidth bw-limit
Optional
Enable VLAN VPN (Q-in-Q) on
port
port
vlan-vpn enable
Optional
Configure user-defined flow
template
template
flow-template
user-defined slot slotnum
template-info
user-defined slot slotnum
template-info
Required
Configure ACL rules
rule rule-id permit mpls
l2label-range ingress any
egress any
l2label-range ingress any
egress any
Required
Configure packet redirection
traffic-redirect inbound
link-group { acl-number |
acl-name } [ rule rule [
system-index index ] ] | slot
slotid vlanid [ join-vlan ] }
link-group { acl-number |
acl-name } [ rule rule [
system-index index ] ] | slot
slotid vlanid [ join-vlan ] }
Required
Enable VPSL load sharing
vpls-load-share enable
Optional