3com S7906E 安装指导
1-24
To do...
Use the command...
Remarks
Enter IGMP-Snooping view
igmp-snooping
—
Configure 802.1p precedence
for IGMP messages
for IGMP messages
dot1p-priority priority-number
Required
The default 802.1p precedence
for IGMP messages is 0.
for IGMP messages is 0.
Configuring 802.1p precedence for IGMP messages in a VLAN
Follow these steps to configure 802.1p precedence for IGMP messages in a VLAN:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter VLAN view
vlan vlan-id
—
Configure 802.1p precedence
for IGMP messages in the
VLAN
for IGMP messages in the
VLAN
igmp-snooping
dot1p-priority priority-number
dot1p-priority priority-number
Required
The default 802.1p precedence
for IGMP messages is 0.
for IGMP messages is 0.
Displaying and Maintaining IGMP Snooping
To do...
Use the command...
Remarks
Display IGMP snooping multicast
group information (on a distributed
device)
group information (on a distributed
device)
display igmp-snooping group [ vlan
vlan-id ] [ slot slot-number ] [ verbose ]
vlan-id ] [ slot slot-number ] [ verbose ]
Available in
any view
any view
Display information about IGMP
snooping multicast groups (on a
distributed IRF device)
snooping multicast groups (on a
distributed IRF device)
display igmp-snooping group [ vlan
vlan-id ] [ chassis chassis-number slot
slot-number ] [ verbose ]
vlan-id ] [ chassis chassis-number slot
slot-number ] [ verbose ]
Available in
any view
any view
Display the statistics information of
IGMP messages learned by IGMP
snooping
IGMP messages learned by IGMP
snooping
display igmp-snooping statistics
Available in
any view
any view
Clear IGMP snooping multicast
group information
group information
reset igmp-snooping group
{ group-address | all } [ vlan vlan-id ]
{ group-address | all } [ vlan vlan-id ]
Available in
user view
user view
Clear the statistics information of all
kinds of IGMP messages learned
by IGMP snooping
kinds of IGMP messages learned
by IGMP snooping
reset igmp-snooping statistics
Available in
user view
user view
z
The reset igmp-snooping group command works only on an IGMP snooping–enabled VLAN, but
not on a VLAN with IGMP enabled on its VLAN interface.
z
The reset igmp-snooping group command cannot clear the IGMP snooping multicast group
information for static joins.