3com S7906E 安装指导

 

1-24 

Display VRRP group 
statistics 

display vrrp ipv6 statistics [ interface 
interface-type interface-number [ vrid 
virtual-router-id ] ] 

Available in any view 

Clear VRRP group statistics 

reset vrrp ipv6 statistics [ interface 
interface-type interface-number [ vrid 
virtual-router-id ] ] 

Available in user view 

 

This section provides these configuration examples: 

z 

Single VRRP Group Configuration Example 

z 

VRRP Interface Tracking Configuration Example 

z 

z 

z 

Host A needs to access Host B on the Internet, using 202.38.160.111/24 as its default gateway. 

z 

Switch A and Switch B belong to VRRP group 1 with the virtual IP address of 202.38.160.111/24. 

z 

If Switch A operates normally, packets sent from Host A to Host B are forwarded by Switch A; if 

Switch A fails, packets sent from Host A to Host B are forwarded by Switch B. 

Figure 1-9 Network diagram for single VRRP group configuration 

Host A

Switch A

Switch B

Virtual IP address: 

202.38.160.111/24

Vlan-int2

202.38.160.1/24

Vlan-int2

202.38.160.2/24

Host B

202.38.160.3/24

203.2.3.1/24

Internet

 

 

1)  Configure Switch A 

# Configure VLAN 2. 

<SwitchA> system-view 

[SwitchA] vlan 2 

[SwitchA-vlan2] port gigabitethernet 2/0/5 

[SwitchA-vlan2] quit