3com S7906E 安装指导
1-7
For the detailed description of the snmp-agent trap enable command, refer to the SNMP Commands
in the System Volume.
Displaying and Maintaining ACFP
To do…
Use the command…
Remarks
Display the configuration
information of the ACFP server
information of the ACFP server
display acfp server-info
Display the configuration
information of an ACFP client
information of an ACFP client
display acfp client-info [ client-id ]
Display the configuration
information of an ACFP policy
information of an ACFP policy
display acfp policy-info [ client client-id
[ policy-index ] | dest-interface
interface-type interface-number |
in-interface interface-type
interface-number | out-interface
interface-type interface-number ] [ active
| inactive ]
[ policy-index ] | dest-interface
interface-type interface-number |
in-interface interface-type
interface-number | out-interface
interface-type interface-number ] [ active
| inactive ]
Display ACFP rule
configuration information
configuration information
display acfp rule-info { in-interface
[ interface-type interface-number ] |
out-interface [ interface-type
interface-number ] | policy [ client-id
policy-index ] }
[ interface-type interface-number ] |
out-interface [ interface-type
interface-number ] | policy [ client-id
policy-index ] }
Display the configuration
information of the ACFP trap
function
information of the ACFP trap
function
display snmp-agent trap-list
Available in any view
Configuring ACFP Client (OAP Card)
You need to configure the ACFP collaboration policy and ACFP collaboration rules on the ACFP client,
namely, the OAP card through MIB. The specific configuration depends on the service software used on
the ACFP client. For the configuration of the OAP card, refer to the related manual of the ordered OAP
card.