3com S7906E 安装指导
1-14
To do…
Use the command…
Remarks
Ignore MTU check for DD
packets
packets
ospfv3 mtu-ignore [ instance
instance-id ]
instance-id ]
Required
Not ignored by default
Disable Interfaces from Sending OSPFv3 Packets
Follow these steps to disable interfaces from sending OSPFv3 packets:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter OSPFv3 view
ospfv3 [ process-id ]
—
Disable interfaces from sending
OSPFv3 packets
OSPFv3 packets
silent-interface
{ interface-type
interface-number | all }
{ interface-type
interface-number | all }
Required
Not disabled by default
z
Multiple OSPFv3 processes can disable the same interface from sending OSPFv3 packets. Using
the silent-interface command disables only the interfaces associated with the current process.
z
After an OSPF interface is set to silent, direct routes of the interface can still be advertised in
Intra-Area-Prefix-LSAs via other interfaces, but other OSPFv3 packets cannot be advertised.
Therefore, no neighboring relationship can be established on the interface. This feature can
enhance the adaptability of OSPFv3 networking.
Enable the Logging of Neighbor State Changes
Follow these steps to enable the logging of neighbor state changes:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter OSPFv3 view
ospfv3 [ process-id ]
—
Enable the logging of neighbor
state changes
state changes
log-peer-change
Required
Enabled by default