3com S7906E 参考指南

 

1-6 

Upstream interface 

Upstream interface of the (S, G) entry. Multicast packets 
should arrive through this interface.  

List of 2 downstream interfaces 

Downstream interface list. These interfaces need to 
forward multicast packets. 

 

display multicast ipv6 rpf-info ipv6-source-address [ ipv6-group-address ] 

Any view 

1: Monitor level 

ipv6-source-address: IPv6 multicast source address. 

ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16 (excluding FFx0::/16, 

FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number from 0 to F. 

Use the display multicast ipv6 rpf-info command to display RPF information of an IPv6 multicast 

source. 

Related commands: display multicast ipv6 routing-table, display multicast ipv6 forwarding-table. 

# Display all RPF information of the multicast source with an IPv6 address 2001::101. 

<Sysname> display multicast ipv6 rpf-info 2001::101 

 RPF information about source 2001::101: 

     RPF interface: Vlan-interface1, RPF neighbor: 2002::201 

     Referenced prefix/prefix length: 2001::/64 

     Referenced route type: igp 

     Route selection rule: preference-preferred 

     Load splitting rule: disable 

Table 1-5 display multicast ipv6 rpf-info command output description 

RPF information about source 2001::101

RPF information of the IPv6 multicast source 2001::101 

RPF interface 

Indicates the interface type and number of the RPF 
interface 

RPF neighbor 

Indicate the IPv6 address of the RPF neighbor 

Referenced prefix/prefix length 

Referenced route and prefix length