3com S7906E 参考指南
1-1
1
Port Isolation Configuration Commands
Port Isolation Configuration Commands
display port-isolate group
Syntax
display port-isolate group
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display port-isolate group command to display information about the default isolation group
(isolation group 1).
Examples
# On a single-isolation-group device, display information about the isolation group.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 1
Ethernet2/0/4 Ethernet2/0/5
Table 1-1 display port-isolate group command output description
Field
Description
Port-isolate group information
Display the information of a port-isolation group
Uplink port support
Indicates whether the uplink port is supported.
Group ID
Isolation group number
Ethernet2/0/4 Ethernet2/0/5
Isolated ports in the isolation group