3com S7906E 参考指南
1-10
regular-expression: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the display mpls ldp remote-peer command to display information about remote LDP peers.
Related commands: mpls ldp (system view), mpls ldp (interface view), remote-ip.
Examples
# Display information about remote peer BJI.
<Sysname> display mpls ldp remote-peer remote-name BJI
LDP
Remote
Entity
Information
--------------------------------------------------------------------------
Remote Peer Name : BJI
Remote Peer IP : 3.3.3.3 LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer : 45 Sec
Negotiated Hello Timer : 45 Sec
Hello Message Sent/Rcvd : 3/2 (Message Count)
--------------------------------------------------------------------------
display mpls ldp session
Syntax
display mpls ldp session [ all [ verbose ] | [ vpn-instance vpn-instance-name ] [ peer-id | verbose ] ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays all information.
verbose: Displays detailed information.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters. Specify
this argument to display information about all LDP sessions of a specified VPN.
peer-id: LSR ID of the peer.
|: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration in the System Volume.
begin: Displays all lines starting with the line that matches the regular expression.
exclude: Displays all lines other than those matching the regular expression..
include: Displays all lines matching the regular expression.