3com S7906E 参考指南
1-8
Table 1-5 display bgp l2vpn route-distinguisher ce-id command output description
Field
Description
Origin codes
Route origin codes, which can be:
i – IGP: Indicates that the network layer reachability information is from
within the AS
within the AS
e – EGP: Indicates that the network layer reachability information is
learned through EGP
learned through EGP
? – incomplete: Indicates that the network layer reachability information is
learned through other ways
learned through other ways
CE ID
CE number in the VPN
nexthop
IP address of the next hop
pref Preference
as-path
AS-PATH of the route
# Display L2VPN information with the RD being 100:1, the CE ID being 4, and the label offset being 0 in
the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4 label-offset 0
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
nexthop:3.3.3.9, pref :100, as-path :
label base:132096,label range:10,layer-2 mtu:0,encap type:Unknown or Reserved
label state
132096 down
132097 up
132098 down
132099 down
132100 down
132101 down
132102 down
132103 down
132104 down
132105 down
The following table gives the description on the fields of the display bgp l2vpn route-distinguisher
ce-id label-offset command.
Table 1-6 Output description
Field
Description
Origin codes
Route origin codes, which can be:
i – IGP: Indicates that the network layer reachability information is from
within the AS
within the AS
e – EGP: Indicates that the network layer reachability information is learned
through EGP
through EGP
? – incomplete: Indicates that the network layer reachability information is
learned through other ways
learned through other ways
nexthop
IP address of the next hop