3com S7906E 参考指南

 

1-43 

# In BGP-VPNv4 subaddress family view, configure the device to use the local address as the next hop 

of a route when advertising it to peer group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv4-family vpnv4 

[Sysname-bgp-af-vpnv4] peer test next-hop-local 

# In BGP-L2VPN address family view, configure the device to use the local address as the next hop of 

a route when advertising it to peer group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] l2vpn-family 

[Sysname-bgp-af-l2vpn] peer test next-hop-local 

peer { group-name | ip-address } preferred-value value 

undo peer { group-name | ip-address } preferred-value 

BGP-VPNv4 subaddress family view 

2: System level 

group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters. 

ip-address: IP address of the peer. 

value: Preferred value to be specified, in the range 0 to 65535. 

Use the peer preferred-value command to specify the preferred value for the routes received from the 

specified peer/peer group. 

Use the undo peer preferred-value command to restore the default. 

By default, the preferred value for the routes received from a peer/peer group is 0. 

# Set the preferred value for the routes received from peer 131.108.1.1 to 50. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv4-family vpnv4 

[Sysname-bgp-af-vpnv4] peer 131.108.1.1 preferred-value 50