3com S7906E 参考指南

 

2-16 

remark service-vlan-id vlan-id-value 

undo remark service-vlan-id 

Traffic behavior view 

2: System Level 

vlan-id-value: VLAN ID to be set for packets, in the range of 1 to 4094.  

Use the remark service-vlan-id command to configure the action of setting the service provider 

network VLAN ID for a traffic behavior.  

Use the undo remark service-vlan-id command to remove the action of setting the service provider 

network VLAN ID.  

z 

Note that: If the remark service-vlan-id action will be applied to the inbound direction of a port or 

port group on an EA LPU, the classification rule must be configured with the if-match 

customer-vlan-id command, and the other actions except remark dot1p cannot be configured in 

the traffic behavior.  

z 

If the remark service-vlan-id action will be applied to the outbound direction of a port or port group 

on an SC LPU, any other actions except filer and remark dot1p cannot be configured in the traffic 

behavior.  

z 

The remark service-vlan-id action cannot be applied to a VLAN or applied globally. 

Related commands: qos policy, traffic behavior, classifier behavior.  

# Configure the action of setting the service provider network VLAN ID to 2 for a traffic behavior.  

<Sysname> system-view 

[Sysname] traffic behavior database 

[Sysname-behavior-database] remark service-vlan-id 2 

traffic behavior behavior-name 

undo traffic behavior behavior-name 

System view