3com S7906E 参考指南
1-5
Default Level
1: Monitor level
Parameters
session: Displays the session information of the SSH server.
status: Displays the status information of the SSH server.
Description
Use the display ssh server command on an SSH server to display SSH server status information or
session information.
Related commands: ssh server authentication-retries, ssh server rekey-interval, ssh server
authentication-timeout, ssh server enable, ssh server compatible-ssh1x enable.
Examples
# Display the SSH server status information.
<Sysname> display ssh server status
SSH Server: Disable
SSH version : 1.99
SSH authentication-timeout : 60 second(s)
SSH server key generating interval : 0 hour(s)
SSH authentication retries : 3 time(s)
SFTP server: Disable
SFTP server Idle-Timeout: 10 minute(s)
Table 1-4 display ssh server status command output description
Field
Description
SSH Server
Whether the SSH server function is enabled
SSH version
SSH protocol version
When the SSH supports SSH1, the protocol
version is 1.99. Otherwise, the protocol version
is 2.0.
version is 1.99. Otherwise, the protocol version
is 2.0.
SSH authentication-timeout
Authentication timeout period
SSH server key generating interval
SSH server key pair update interval
SSH authentication retries
Maximum number of SSH authentication
attempts
attempts
SFTP server
Whether the SFTP server function is enabled
SFTP server Idle-Timeout
SFTP connection idle timeout period
# Display the SSH server session information.
<Sysname> display ssh server session
Conn Ver Encry State Retry SerType Username
VTY 0 2.0 DES Established 0 SFTP client001