3com S7906E 参考指南
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
2-15
By default, a device uses the IP address of the interface determined by the matched route as the source
IP address to communicate with an FTP server.
Note that:
z
The source address can be specified as the source interface and the source IP address. If you use
the ftp client source command to specify the source interface and then the source IP address, the
newly specified source IP address overwrites the configured source interface and vice versa.
z
If the source address is specified with the ftp client source command and then with the ftp
command, the source address specified with the latter one is used to communicate with the FTP
server.
z
The source address specified with the ftp client source command is valid for all FTP connections
and the source address specified with the ftp command is valid only for the current FTP
connection.
Related commands: display ftp client configuration.
Examples
# Specify the source IP address of the FTP client as 2.2.2.2.
<Sysname> system-view
[Sysname] ftp client source ip 2.2.2.2
# Specify the source interface of the FTP client as Vlan-interface 1.
<Sysname> system-view
[Sysname] ftp client source interface Vlan-interface 1
ftp ipv6
Syntax
ftp ipv6 [ server-address [ service-port ] [ source ipv6 source-ipv6-address ] [ -i interface-type
interface-number ] ]
View
User view
Default Level
3: Manage level
Parameters
server-address: IP address or host name of the remote FTP server.
service-port: TCP port number of the FTP server, in the range 0 to 65535. The default value is 21.
source ipv6 source-ipv6-address: Specifies a source IPv6 address for transmitted FTP packets. This
address must be an IPv6 address that has been configured on the device.
-i interface-type interface-number: Specifies the type and number of the egress interface. This
parameter can be used only in case that the FTP server address is a link local address and the specified
egress interface must have a link local address (For the configuration of link local addresses, see IPv6
Basics in the IP Services Volume).