3com S7906E 参考指南

 

1-17 

first floor of building A, you can set the engine ID of device 1 to 000Af0010001, and that of device 2 to 

000Af0010002. 

Related commands: snmp-agent usm-user. 

# Configure the local engine ID as 123456789A. 

<Sysname> system-view 

[Sysname] snmp-agent local-engineid 123456789A 

snmp-agent log { all | get-operation | set-operation } 

undo snmp-agent log { all | get-operation | set-operation } 

System view 

3: Manage level 

all: Enables logging of SNMP GET and SET operations. 

get-operation: Enables logging of SNMP GET operation. 

set-operation: Enables logging of SNMP SET operation. 

Use the snmp-agent log command to enable SNMP logging. 

Use the undo snmp-agent log command to restore the default. 

By default, SNMP logging is disabled. 

If a specified SNMP logging is enabled, when NMS performs a specified operation on SNMP Agent, the 

latter records the operation-related information and saves it to the information center. With parameters 

for the information center set, output rules of the SNMP logs are decided (that is, whether logs are 

permitted to output and the output destinations). 

# Enable logging of SNMP GET operation. 

<Sysname> system-view 

[Sysname] snmp-agent log get-operation 

# Enable logging of SNMP SET operation. 

<Sysname> system-view 

[Sysname] snmp-agent log set-operation