3com S7906E 参考指南

 

1-3 

System view 

3: Manage level 

patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file 

used. 

slave: Specifies the standby main board.  

slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the 

device model. 

Use the patch deactive command to stop running the specified patch and all the ACTIVE patches 

before the specified patch number, and the system will run at the original software version.  

All the ACTIVE patches (including the specified patch) turn to DEACTIVE state.  

This command is not applicable to the patches in the RUNNING state.  

If you execute this command without specifying slave or slot-number, the command deactivates the 

specified patches on the active main board. 

# Stop running patch 3 and all the ACTIVE patches after patch 3 on board 5. 

<Sysname> system-view 

[Sysname] patch deactive 3 slot 5 

patch delete patch-number [ slave | slot slot-number ] 

System view 

3: Manage level 

patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file 

used. 

slave: Specifies the standby main board.  

slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the 

device model.