3com S7906E 参考指南
1-22
display ipv6 relay-route
Syntax
display ipv6 relay-route
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 relay-route command to display IPv6 recursive route information.
Examples
# Display IPv6 recursive route information.
<Sysname> display ipv6 relay-route
Total Number of relay-route is: 1
Dest/Mask: 192::1/64
Related instance id(always 0): 0(1)
Table 1-9 display ipv6 relay-route command output description
Field
Description
Total Number of Relay-route
Total number of recursive routes
Dest/Mask Destination
address/mask of the recursive route
Related instance id(always 0)
IPv6 supports public networks only. Therefore, the instance
ID can be 0 only.
ID can be 0 only.
The number in the parentheses after the instance ID
indicates the number of routes that have used the recursive
route in the routing table.
indicates the number of routes that have used the recursive
route in the routing table.
display ipv6 relay-tunnel
Syntax
display ipv6 relay-tunnel
View
Any view
Default Level
1: Monitor level