3M WX20 补充手册

3M™ Digital Projector WX20 Product Safety Guide

6

© 3M 2008. All rights reserved.

‡ 7RUHGXFHWKHULVNDVVRFLDWHGZLWKFKRNLQJ
 

- 

Keep the battery away from children and pets.

‡ 7RUHGXFHWKHULVNDVVRFLDWHGZLWKH[SRVXUHWRKD]DUGRXVYROWDJH
 

- 

Disconnect power cord when the projector is not in use, during lamp 
replacement, and while cleaning.

 'RQRWUHPRYHDQ\VFUHZVRWKHUWKDQWKRVHVSHFL¿HGLQWKHODPSUHSODFHPHQW

instructions.

 

- 

Do not store or operate this projector in wet environments.

 

- 

Do not modify this projector.

 

- 

Do not attempt to service the projector - there are no user serviceable parts, 
other than the lamp cartridge, inside the projector. Contact a 3M authorized 
service provider for service.

 

- 

Do not allow water or other liquids to enter the projector.

 - 

 

Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.

-

The lamp in this product contains mercury. Dispose of projection lamp in a manner 
that is consistent with your local hazardous waste regulations for mercury.

-   For recycling and disposal information, contact your respective governmental 

agencies.

    In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at 

www.lamprecycle.org

    In Canada, contact 1-800-364-3577 (3M Canada)

‡ 7RUHGXFHWKHULVNDVVRFLDWHGZLWKH[SRVXUHWRKD]DUGRXVYROWDJHDQGRU¿UH
 

- 

Replace power cord if damaged.

 

- 

Contact a 3M authorized service provider if the projector becomes damaged.

 

- 

Use a grounded extension cord with a rating at least equal to that of the projector.

 

- 

Connect this projector to a grounded outlet.

 

- 

Do not use this projector around unsupervised children.

‡ 7RUHGXFHWKHULVNDVVRFLDWHGZLWKKRWVXUIDFHRIODPSFDUWULGJH
 

- 

Unplug the projector from the electrical outlet and allow the lamp to cool for 45 
minutes before replacing the lamp.

‡ 7RUHGXFHWKHULVNDVVRFLDWHGZLWKDUXSWXUHGODPS
 

- 

Always handle the fragile lamp module with care.

 

- 

Remove the projector from the ceiling or wall mount before replacing the lamp.  

 

- 

Use care when replacing the lamp module in the event of a lamp rupture - small 
glass particles and small amounts of mercury may be present.

 

- 

Ventilate the area where the lamp rupture occurred.

 

- 

Wear safety goggles and gloves when cleaning up ruptured lamp debris.

 

- 

Carefully collect the ruptured lamp debris in a closed container and dispose of 
the container and the expired lamp module in accordance with federal, state, 
and local regulations.

 

- 

Wash your hands thoroughly after handling ruptured lamp debris.

 

- 

Replace the lamp module when the lamp replacement message appears.

 

- 

Never replace the lamp module with a previously used lamp module.