3M X62w 说明手册
3M™ Multimedia Projector X62w Product Safety Guide
© 3M 2006
12
CR/P
R
CB/P
B
AUDIO IN
2
AUDIO IN
1
RGB IN
1
RGB IN
2
SD CARD
AUX I/O
DC 5V
0.5A
LAN
CONTR
OL
RGB OUT
AUDIO OUT
USB
VIDEO
S-VIDEO
AC IN
RGB IN2
RGB OUT
CONTRO
L
AUDIO IN
2
Y
L
CB/P
B
CR/P
R
AUDIO IN
1
SD CARD
AUX I/O
DC 5V 0
.5A
LAN
VO
LT
AG
E 70V
PO
W
ER
280W
AUDIO O
UT
USB
S-VIDEO
ENGLISH
√
Note
Reset the lamp operation hours. See “Reset Lamp Hours” for details.
3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (3) to secure the lamp module in place.
Optional Lamp: 78-6969-9875-2 (Contact 3M Customer Service.)
Slide the lamp door (2) back in place and firmly fasten the lamp door a screw. (1)
√
Note
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide
the lamp door to the side to remove it. (2)
2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by
arrow). (3)
√
Note
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
(2) Lamp access door
(1) Screw
() Handle
(3) Screws