3M X90 说明手册

Settings

Network Settings

Displays and configures network settings.

Click the 

[Apply] button to save the settings.

• The new configuration settings are activated after restarting the 

network connection. When the configuration settings are changed, you must 

restart the network connection. You can restart the network connection by 

clicking 

[Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network 

administrator before setting server addresses.

NOTE

Configures network settings.

Enables DHCP.

Disables DHCP.

Configures the IP address when DHCP is disabled.

Configures the Subnet Mask when DHCP is disabled.

Configures the Default Gateway when DHCP is disabled.

Configures the Projector name.

Configures the location to be referred to when using SNMP.

Configures the contact information to be referred to when 

using SNMP.