Clarion adx5655 用户指南
10
ADX5655z
280-7452-00
Basic Operations
∗
Once selected, the preferred display becomes
the display default. When a function adjustment
such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
the display default. When a function adjustment
such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
∗
When you have entered a title in a CD, it ap-
pears in the sub display.
pears in the sub display.
If you have not en-
tered a title, “NO-TTL” appears in the title dis-
play instead. For information on how to enter a
title, refer to the subsection “Entering titles”
in the “Other Handy Functions”.
play instead. For information on how to enter a
title, refer to the subsection “Entering titles”
in the “Other Handy Functions”.
∗
You can adjust the way of scrolling a title. For
the details on it, refer to the subsection
“Adjusting the way of scrolling” in the “Other
Handy Functions”.
the details on it, refer to the subsection
“Adjusting the way of scrolling” in the “Other
Handy Functions”.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
stored in memory. Select the one you prefer.
∗
The factory default setting is “OFF”.
Each time you press Z-EHCR button
2
, the tone
effect changes in the following order:
“Z-EHCR 1”
➜
“Z-EHCR 2”
➜
“Z-EHCR 3”
➜
“OFF”
➜
“Z-EHCR 1”...
• Z-EHCR 1 : bass emphasized
• Z-EHCR 2 : treble emphasized
• Z-EHCR 3 : bass and treble emphasized
• OFF
: no sound effect
Adjusting the tone
Press A-M button
(
and select the item to ad-
just. Each time you press A-M button
(
, the item
changes in the following order:
●
When the Z-enhancer is off
“BASS”
➜
“TREB”
➜
“BAL”
➜
“FAD”
➜
Function mode...
●
When Z-enhancer 1, 2 or 3 is set
“Z-EHCR”
➜
“BAL”
➜
“FAD”
➜
Function
mode...
Adjusting the bass
1. Press A-M button
(
and select “BASS”.
2. Press Up button
&
to emphasize the bass,
or press Down button
*
to attenuate the bass.
∗
The factory default setting is “0”. (Adjustment
range:
range:
−
6 to +6)
3. When the adjustment is complete, press A-M
button
(
several times until the function mode
is reached.
Adjusting the treble
1. Press A-M button
(
and select “TREB”.
2. Press Up button
&
to emphasize the treble,
or press Down button
*
to attenuate the
treble.
∗
The factory default setting is “0”. (Adjustment
range:
range:
−
6 to +6)
3. When the adjustment is complete, press A-M
button
(
several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button
(
and select “BAL”.
2. Press Up button
&
to emphasize the sound
from the right speaker, or press Down button
*
to emphasizes the sound from the left
speaker.
∗
The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button
(
several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button
(
and select “FAD”.
2. Press Up button
&
to emphasize the sound
from the front speakers, or press Down but-
ton
ton
*
to emphasize the sound from the rear
speakers.
∗
The factory default setting is “0”. (Adjustment
range: F12 to R12)
range: F12 to R12)
3. When the adjustment is complete, press A-M
button
(
several times until the function mode
is reached.
Adjusting the Z-enhancer
1. Press Z-EHCR button
2
and select the Z-
enhancer mode (1 to 3) to adjust.
2. Press A-M button
(
and select “Z-EHCR”.
3. Press Up button
&
or press Down button
*
to adjusts Z-enhancer.
∗
When Z-enhancer 1 is selected, you can adjust
the bass in the range of ±2.
∗
When Z-enhancer 2 is selected, you can adjust
the treble in the range of ±2.
∗
When Z-enhancer 3 is selected, you can adjust
the bass and treble in the range of ±2.
4. When the adjustment is complete, press A-M
button
(
several times until the function mode
is reached.