Xerox 4112 用户指南

Xerox 4112/4127 Copier/Printer System Administration Guide

9-11

9. Troubleshooting

Multiple numbers of computers are 

instructing print jobs simultaneously to 

the machine.

Status 

display

Print job failed (Network Error)

Check point Not applicable
Remedy

None (The print job will automatically be restarted.)

The available disk storage on the 

computer is insufficient and unable to 

spool the print file.

Status 

display

Print job failed (Spool Error)

Check point Open 

 and right click the disk where 

the system is installed (for example, C: drive). Select 

 from the menu and confirm the available 

storage.

Remedy

Delete unnecessary files to increase available disk 

storage. Then select 

 from the 

 

menu in the 

 window to cancel the pause (the 

print job will restart).

The IP address is incorrect

Request your network 

administrator to check the IP 

address on the machine.

Set a correct IP address on the 

machine.

The volume of the print data of an 

instruction from a computer 

exceeded the maximum 

receivable volume when the LPD 
spool is set to memory spool.

Confirm amount of the LPD spool 

memory and then compare it with 

the required amount for the data 

being printed.

•

If the print data is one file and 

still exceeds the memory 

amount, divide the file to make 

one instruction smaller than 
the memory.

•

If the print data is multiple files 

and exceeds the memory 

amount, decrease the number 

of files to print at once.

An unrecoverable error occurred 

during the printing process.

Confirm if any error messages are 

displayed on the control panel.

Restart the machine.

Switch on the machine after the 

display completely disappears.

The machine is not set to the 

transport protocol which matches 

the protocol on the computer.

Confirm the transport protocol 

selected on the machine.

Select the transport protocol which 

matches the transport protocol 

used by the computer.

The data format the machine is 

trying to process does not match 

the data format of the print data 

transmitted from a computer.

Not applicable

Ctrl-”D” will cancel the output.